Installation; Emc Measures; Housing - Siemens SIMOVERT SLP Operating Instructions Manual

SIMOLINK Pulse Generator
4

Installation

4.1

EMC measures

NOTE
4.2

Housing

Siemens AG GWE-477 764 4070.76 J
SIMOVERT MASTERDRIVES
02.2001
The SIMOLINK Pulse Generator module is snapped onto an EN 50022-
compliant TS 35 top-hat rail. The requisite mechanical mounting
elements are fitted in the housing.
The module is connected to ground via the top-hat rail. The ground
connection between the rail and the equipotential bonding conductor
must be made by the end-user during installation.
For further information, please refer to Chapter "Instructions for Design
of Drives in Conformance with EMC Regulations" of the SIMOVERT
MASTERDRIVES Compendium Motion Control, Order No.:
6SE7087-6QX50.
The following diagrams show a schematic illustration of the housing
and the layout of connections and operating elements.
SIMOLINK
PULS GENERATOR SLP
SYNC
POWER FREQ
0
2
ON
7
2
X2
Front view
Fig. 4-1
Operating Instructions
Installation
Side view
4-1