Steps
1
Turn the mylar to find the memory-module slot.
2
Align the notch on the memory module with the tab on the memory-module slot.
3
Slide the memory module firmly into the slot at an angle.
4
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1
Install the
base
cover.
2
Follow the procedure in
Identifier
Status
Coin-cell battery
Identifier
Status
Removing the coin-cell battery
Prerequisite
1
Follow the procedure in
CAUTION:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that
you note the BIOS setup program's settings before removing the coin-cell battery.
18
Removing and installing components
After working inside your
computer.
GUID-D99D5F9B-0FF3-406B-A51F-FFA061BB89EA
Released
GUID-9767CB19-E8EA-42DD-94FE-0EC35344A5E9
Released
Before working inside your
computer.