I/O Board; Removing The I/O Board - Dell G3 3590 Service Manual

About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
Steps
1 Place the power-adapter port into the slot and adhere the power-adapter port cable on the palm rest and keyboard assembly.
2 Connect the power-adapter port cable to the system board.
3 Align and place the power-adapter port bracket over the power-adapter port.
4 Replace the two screws (M2x3) to secure the power-adapter port bracket to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in
Identifier
Status

I/O board

Identifier
Status

Removing the I/O board

Prerequisites
1 Follow the procedure in
2 Remove the base cover.
40 Removing and installing components
After working inside your computer.
GUID-A4EB1B18-E790-4DC7-A6B0-85015144D8CE
Released
GUID-59DA147E-C1D2-4060-8A28-765A287FF639
Released
Before working inside your computer.