3
Remove the battery.
About this task
The following image indicates the location of the I/O board and provides a visual representation of the removal procedure.
Steps
1
Lift the latch to disconnect the I/O-board cable from the I/O board.
2
Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
3
Lift the I/O board off the palm-rest and keyboard assembly.
Identifier
Status
Installing the I/O board
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
GUID-A9CE11EA-716D-4685-BA5C-E0F6BD7B85A1
Released
Removing and installing components
41