Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell G3 3590 Service Manual

4 Install the heat sink.
5 Install the left fan.
6 Install the right fan.
7 Install the WLAN card.
8 Install the solid-state drive/Intel Optane memory
9 Install the battery.
10 Install the base cover.
11 Follow the procedure in
Identifier
Status

Palm-rest and keyboard assembly

Identifier
Status

Removing the palm-rest and keyboard assembly

Prerequisites
1 Follow the procedure in
2 Remove the base cover.
3 Remove the battery.
4 Remove the memory
5 Remove the WLAN card.
6 Remove the left fan.
7 Remove the right fan.
8 Remove the solid-state drive/Intel Optane memory
9 Remove the hard drive.
10 Remove the I/O board.
11 Remove the touchpad.
12 Remove the speakers.
13 Remove the display assembly.
14 Remove the power-adapter
15 Remove the system board.
NOTE: The system board can be removed with the heat sink attached.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
52 Removing and installing components
After working inside your
GUID-4AAEA62D-3F30-4E6E-ADEC-AD46B79B8EA6
Released
GUID-31169B40-7319-4910-98EC-40F9D3DD0D09
Released
Before working inside your
modules.
port.
module.
computer.
computer.
module.