Installing The Solid-State Drive/Intel Optane Memory Module - Dell G3 3590 Service Manual

Steps
1 Locate the solid-state drive/Intel Optane memory module on your computer.
2 Remove the screw (M2x3) that secures the solid-state drive/Intel Optane memory module to the system board.
3 Slide and lift the solid-state drive/Intel Optane memory module off the solid-state drive/Intel Optane memory module slot on the
system board.
Identifier
Status

Installing the solid-state drive/Intel Optane memory module

Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive/Intel Optane memory module and provides a visual representation of the
installation procedure.
If you are installing a solid-state drive/Intel Optane memory module that is a different form factor from the original (2280 to 2230), then
first remove the solid-state drive screw-mount bracket and rotate it 180 degrees before inserting it in the other solid-state drive screw-
mount bracket slot.
22 Removing and installing components
GUID-07E87825-A9FD-42DE-8914-3A7060D7C836
Released