Removing And Installing Components; Recommended Tools; Screw List - Dell G3 3590 Service Manual

Identifier
Status
Identifier
Status

Recommended tools

The procedures in this document may require the following tools:
• Philips screwdriver #1
• Flat-head screwdriver
• Plastic scribe
Identifier
Status

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to
Base cover Palm rest and keyboard
assembly
Battery Palm rest and keyboard
assembly
Solid-state drive Solid-state drive bracket
10

Removing and installing components

GUID-7FBB11D7-9820-47BB-AFAA-48FA912314D9
Released
Removing and installing components
GUID-EA979CC8-84EC-4827-86C4-C80A8C31F4BF
Released
GUID-CC648B28-FBF9-4A6F-BB11-4C6C2FA3D08A
Released
Screw type
M2x7
M2x3
M2x3
Quantity Screw image
6
NOTE:
may vary depending
on the configuration
ordered.
2
1
2
Screw color