Table of Contents
Advertisement
Switch Settings
Setting Direction
Input Type
Operation and Function Setting
10
Normal
Fixed
Refer to 4-1 Memory Allocation for details of the memory contents.
Selects whether the data settings are made from the Data Setting Console or
from the C200H PC, using a user program or Programming Console.
Executed Bank Number
The setting of the executed bank number is made from the C200H PC, regard-
less of the ON/OFF setting of this switch.
SW202
Switch number
0
1
2
3
4
5
6
7
8
9
The switch is factory-set to 0.
The selected position is shown by the arrow. Turn the switch with a small flat-
blade screwdriver.
The permissible setting range for measurement is –999 to 9999 (EU).
SW203
Parameters can be designated as required using
commands (Refer to 4-1 Memory Allocation ).
Parameters are allocated in advance.
Input type setting
Loop 1
4 to 20 mA
1 to 5 V
0 to 5 V
0 to 10 V
4 to 20 mA
4 to 20 mA
4 to 20 mA
1 to 5 V
1 to 5 V
0 to 5 V
Operation and Function Setting
NO
OFF
ON
Section 2-2
Loop 2
4 to 20 mA
1 to 5 V
0 to 5 V
0 to 10 V
1 to 5 V
0 to 5 V
0 to 10 V
0 to 5 V
0 to 10 V
0 to 10 V
Advertisement
Table of Contents
