Nomenclature and Features
3-3
Nomenclature and Features
3-3-1 Nomenclature
Front View
(With cover open)
Display Key
Level Key
22
Data display
Operation indicators
Display for Cam
Positioner
Cover
Down Key
Up Key
Operation keys
Select parameters
Set data
Switch Loops
Loop Key
PID Control Unit connector
Connecting cable (sold separately)
C200H-CN225 (2 m)
C200H-CN425 (4 m)
The bottom row of the operation keys have upper and lower labels. The upper
labels apply to PID Control Unit operation. The lower labels are for the Cam Po-
sitioner Unit.
Two display sheets are supplied: one for the PID Control Unit and one for the
Cam Positioner Unit. If the Data Setting Console is to be used with the PID Con-
trol Unit only, attach the display sheet for the PID Control Unit.
Note The Data Setting Console will not operate unless a 24-VDC power supply is con-
nected to the PID Control Unit input terminals.
Side View
Panel mounting bracket
(Refer to Appendix B Dimensions for details about
panel mounting.)
Rear View
Section 3-3