Unpacking - Dremel 3D45 Operating And Safety Instructions Manual

DM 160992A425AA 07-17_3D45 7/7/17 11:21 AM Page 11
1. Place box on table, cut tape, and open.
2. Remove top insert.
3. Remove 3D45 and place on table.
4. Open lid and remove top insert.
5. Raise build platform by lifting from both sides.

Unpacking

6. Open door and remove middle insert.
7. Remove bottom insert.
Tip: Keep packaging for future transportation
and storage.
DV-160992A425, Page: MUL (VAA), downloaded at: 2017.12.19_18:02:03, by PT-RT/MKP2_Karan.Patel
11