Table of Contents
Advertisement
General Menu
(Main Menu > Configure > Setup > Edit Setup > General)
From this screen select the buttons required for General recorder configuration.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
(Main Menu > Configure > Setup > Edit Setup> General > Ident)
Unique recorder information.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
90
• Ident - Unique recorder information; Name, Description and ID.
page 90
• Localisation - Set up the recorder for native language use and global settings.
"Localisation" on page 91
• Factory - This menu contains Credits (for activating recorder options), Firmware
Upgrade, Calibration, Demo Traces, Reset Setup and Production.
page 91
• Batch - The Batch menu is for entering the Batch requirements for starting a new
batch, including using a Barcode reader.
• Printer - The Printer menu allows configuration for setting up a printer.
Menu" on page 98
• Groups - Groups of Pens can be specified and named with a Group name or number.
See "Groups" on page 99.
Ident
• Name - Enter the recorder's name. Maximum characters 32
• Description - Enter a description for the recorder using the on-screen keyboard. Maxi-
mum characters 64
• ID - This is a unique 4 digit identifier specific to this recorder. It is advised to change the
ID as all recorders will default to 0001. If Modbus communications are used, it is highly
recommended to use the same number as the Modbus slave ID.
Power up
"Batch Menu" on page 97
.
See "Ident" on
See
See "Factory" on
.
See "Printer
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
