Table of Contents
Advertisement
Protocols used in this manual
Safety and Symbol Identification
Warnings and Safety Precautions
Do's and Don'ts
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Protocols used in this manual
Symbol
WARNING
CAUTION
NOTICE
1. Before any connections are made to the recorder, ensure the protective earth terminal
is connected to a protective conductor before applying power or any other connections.
WARNING
IMPROPER INTERRUPTION OF CONNECTIONS
Any interruption of the protective conductor outside the recorder, or disconnection of
the protective earth terminal is likely to make the recorder dangerous under some fault
conditions. Intentional interruption of the protective conductor is dangerous.
Failure to comply with these instructions could result in death or serious injury.
In order to comply with the requirements of safety standard EN 61010-1:2001, the
recorder should have one of the following as a disconnecting device, located within
easy reach of the operator, and be clearly labelled as the disconnecting safety device:
• A switch or circuit breaker which complies with the requirements of IEC 60947-1 and
IEC 60947-3.
• A separable coupler which can be disconnected without the use of a tool.
• A separable plug, without a locking device, to mate with a socket outlet in
the building.
2. Whenever it is likely that protection has been impaired, the recorder should be made
inoperative and secured against operation. The manufacturer's service centre should
be contacted.
Table 1.3 :
Description
The WARNING symbol indicates a potentially
hazardous situation, which, if not avoided, could
result in death or serious injury.
This CAUTION symbol may indicates a potential-
ly hazardous situation, which, if not avoided, may
result in property damage.
A NOTICE symbol indicates important informa-
tion that must be remembered and aids in job
performance.
3
Advertisement
Table of Contents
