Table of Contents
Advertisement
Pens Menu
(Main Menu > Configure > Setup > Edit Setup> Pens)
Select the Pens button to display all the pens available.
Click on individual pen number to set up each pen profile.
62
Power up
• Enabled - Toggle On and Off.
• Tag - Select and use the on-screen keyboard to type in an identifier for the pen. Up to
48 characters.
• Maths Type - Analogue signals may have a mathematical calculation performed on
them before they are represented as a pen. Basic maths is standard in all recorders.
Full Maths or Math Scripting are options that must be activated.
page 129.
• Edit Maths - Edit the Maths for this particular pen. For details see
Maths Expressions" on page 233.
• Scale - Select Scale to go to a sub menu to set up the scale parameters.
Menu" on page 63
• Logging - Select Logging to go to a sub menu to set up the logging configuration.
"Logging Menu" on page 64
• Alarms - Select Alarms to go to a sub menu to set up the alarm profile.
Menu" on page 66
• Totaliser - Select Totaliser to go to a sub menu to set up the totaliser settings.
"Totaliser Menu" on page 68
• RAV - This will display the Rolling Average for this pen. The recorder takes an average
of the number of samples entered.
Enable the RAV function and enter the Number of Samples (Max 500). Then enter
the Sample Interval, or how often a reading is taken, in seconds. The Prefill will add in
samples based on the sample intervals specified and then take an average reading. No
Prefill will work out the rolling average on the samples as they occur. See
"Effects of Damping and Rolling Average example," on page 53.
Menu path to current menu
The Pens screen displays
all the available pens.
Each pen displays its
scale settings.
Select a pen number to
edit the setup of each pen
including the Scale,
Logging, Alarms and
Totaliser
See "Options" on
"Appendix B:
See "Scale
See "Alarms
See
Figure 4.2,
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
See
Advertisement
Table of Contents
