Table of Contents
Advertisement
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Event Effects (continued)
• Logging - Is an event effect that can Start or Stop logging. Enter which one in Sub Type
and select the relevant pen(s).
• Totaliser - Is an event effect that can Start, Stop, Reset or Reset and Start a Totaliser.
Enter which one in Sub Type and select the relevant pen(s).
• Digital Outputs - Is an event effect that can switch a Digital Output On or Off. Enter
which one in Sub Type and select the relevant relay output(s)
• Alarm Acknowledge - this is an effect of an event that can acknowledge a latched
alarm on a specific pen. Select the pen and the alarm.
• Email – Is an event effect that will send an Email when triggered by a Cause. Eg.
Cause = Totaliser Starts, Effect = Email is sent.
• • Sub Type - Auto, Single Line User or Multiline User. Auto will enter what the
Event was eg. Scheduled or Alarm triggered. Single Line User can have up to
69 characters of text or use
Multiline User can have up to 80 characters per line with up to 1000 characters
including spaces, carriage returns and line feed in total. They can also include
embedded process variable.
• • Recipients - Enter email recipients from the list. If no email recipients are
present. For setting up email recipients see
• • Email Text - Only available when Single Line User is selected as a Sub Type.
Enter text here to add a Mark on Chart when the Email is sent.
• • Email Template - Only available when Multiline User is selected. These are
sets of text scripts that can be pre-written and assigned to an Email. Select a
template from the list. To set up templates for multiline text, see
page 76.
Figure 4.10 Event Effect using a Template with Embedded values
Power up
"Embedded Process Values" on page 85.
"Email" on page 76.
"Email" on
87
Advertisement
Table of Contents
