Table of Contents
Advertisement
There is also a Database Events Logging box that can be ticked that allows any events to
be logged to the database using Trendbus. (Not available for SIREC D200, D300 & D400
recorders).
Summary of Logging Changes - If any changes are made using the Edit button, the Sum-
mary of Changes button becomes active, this will show the last changes made to any of the
channels for this configuration only.
The Delete button will take the channel out of this window and put it into the window showing
available channels for logging, logging will stop for this channel.
The set up is complete and the logging to the database should start immediately.
To check the setup, go back to the Comms Server screen.
Send Recorder Events
Comms Server has a set of chart controls that can control the chart on the recorder from your PC.
This can be done in
Event.
Richt click on an active recorder
to produce the drop down menu
Right click on an active recorder in Comms Server, Ethernet or RS485, either from the recorders
listed in the left hand window or from recorders in the main window.
192
Communications Server
"Realtime chart controls" on page 192
Realtime chart controls
• From the list select Send Recorder Events and the Recorder Chart Functions box will
appear. If the option is not in the list go to Preferences in
page 183.
or can be setup as an Effect of an
"Administration" on
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
