Table of Contents
Advertisement
Comms Menu
(Main Menu > Configure > Setup > Edit Setup> Comms)
Modbus, Web, Email, SNTP, FTP and Peers.
(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP)
Transmission Control Protocol/Internet Protocol.
A protocol for communication between computers, recorders and other devices.
Automatic DNS Names - The recorder will automatically register a unique Network ID using
the serial number. The format is xs-nnnnnn, where nnnnnn is the serial number of the re-
corder. This allows you to locate the recorder for browsing if you are using
Host Configuration Protocol).
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Services
TCP/IP
TCP/IP Settings
• Static IP - Toggle On and Off. With this enabled the IP address will be the same every
time the recorder is powered up. With this feature Off, the recorder's IP address is cre-
ated dynamically using a DHCP
this feature On the IP address can be fixed by entering a known available IP address
below.
• IP Address - (Available when Static IP is On). This is an identification address for com-
munications between two devices. The IP Address identifies a specific recorder.
• Sub Net Mask - (Available when Static IP is On). Acts as a filter when identifying an IP
address
• Gateway - (Available when Static IP is On). A configuration parameter transmitted to
each network device
Power up
See "Comms Services Menu" on page 73
(
Dynamic Host Configuration Protocol) Server. With
(
DHCP
Dynamic
71
Advertisement
Table of Contents
