Table of Contents
Advertisement
Exporting does not remove the data from the device but when the internal memory buffer is
full the latest data will start to over-write the oldest data.
Data can be imported from devices and logged to a
toric
graphed, exported to spread sheets, e-mailed or transferred from devices to other data-
bases located on
data can be sent from a device straight to the server using Ethernet or RS485 links. This
actual current data can then be logged to a database and viewed on a graph in real time,
this is known as '
can be displayed next to each other on a split graph screen. The comms server is used to
configure logging and manage databases and reflect each devices status.
nications Server" on page 182.
Compact flash is not available for the SIREC D200 recorder.
176
Hardware Installation
data'. Databases are managed by a
Remote Database Servers
' data. Different types of data, realtime, logged and historic data
Realtime
Figure 8.3 Data Logging and Transfer
Comms
Server 1
Software
Comms
Server 2
Software
Database
Database Server
. Using the
Logged to Database
SIREC D - Server 1
Logged to Database
SIREC D - Server 2
, known as '
and
Stored
. The data can be retrieved,
actual current
Comms Server
See "Commu-
Data-
base
Database
Server 1
Software
Data-
base
Data-
base
Database
Server 2
Software
Data-
Data-
base
base
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
His-
Advertisement
Table of Contents
