Getting Connected - Ip Address - Siemens SIREC D200 Manual

Getting connected - IP Address

Stand alone system
This is for connecting a local device direct to a PC using an Ethernet crossover cable. By
using a crossover cable, the PC is able to receive data transmitted from the device.
Contact your IT systems administrator for setting up this link.
The TCP/IP properties are displayed showing the PC's IP address and the Subnet mask.
Make a note of the IP Address and the Subnet mask. If there is no IP address or Subnet
mask displayed, contact your IT systems administrator.
When this information is entered, the next stage is to configure the device.
See "TCP/IP" on page 71.
174
Hardware Installation
Uplink (optional) to
other networks
Figure 8.1 Stand Alone system
Switch/hub
Mains
Mains
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04