Table of Contents
Advertisement
Field IO Menu
(Main Menu > Configure > Setup > Edit Setup> Field IO)
Select which type of Field Inputs/Outputs are required for configuration depending on what
type of cards are fitted in the recorder.
50
Power up
• Analogue In - Select this to configure each Analogue Input channel.
In Menu" on page 52.
• Analogue Out - Select this to configure each Analogue Output channel.
logue Out Menu" on page 55.
• Alarm/Digital IO - Select this to configure Relay Alarm Output card or Digital Input/Out-
See "Alarm / Digital IO" on page 56.
put card.
• Pulse Inputs - Select this to configure each Pulse Input channel.
on page 58.
(Not available for the
• Linearisation Tables - To be used with Analogue Input type Volts, Amps or Ohms.
These are user defined tables that can be set up to allow a non-linear input sig-
nal to be used.
See "Linearisation Tables" on page 59.
Table 4.1 : Card Positions and Channel Numbers
Slot position
Slot A
Slot B
Slot G
(Not available for the
SIREC D200
recorder).
SIREC D300
Card type
8 Analogue In
Pulse Inputs
8 Analogue In
Pulse Inputs
4 Analogue Out
4 Relay Output
8 Relay/2 Digital In
8 Digital Input/Output
16 Digital Input/Output
See "Analogue
See "Ana-
SIREC D200
recorder).
See "Pulse Input"
Channel
numbers
1 to 8
1 to 4
9 to 16
9 to 12
9 to 12
1 to 4
1 to 8
1 to 8
1 to 16
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
