Siemens SIREC D400 Quick Start Manual

SIREC D300 and D400 Display Recorders
1. Connections
D300 Mini rear panel
1) 24VDC Inst. power
2) 24V TXP Supply
3) Common Relay Ouput
4) RS485 connection
5) USB Host
6) Ethernet connection
7) AC supply 100-250VAC
8) CJC Connector
Analogue Input board (4, 6 or 8 channel).
D300 = Slots A & B, D400 = Slots A to F
MV, V T/C Passive
Ohms 4 wire R/T
Analogue Output (2 or 4 channel).
D300 = Slot B only, D400 = Slots E&F
Pulse Input (4 channel).
D300 = Slots A & B, SX/GR Multi = Slots A to F
Relay Alarm (4 or 8 channel).
D300 = Slot G, D400 = Slots G to I
Digital Input / Output (8 or 16 channel)
D300= Slot G, D400 = Slots G to I
Key: NO = Normally Open, C = Common, NC = Normally Closed,
(2) 24V Transmitter Power Supply connections are made via 2-way
for D300, 2x10-way connectors for SX/GR Multi.
1
Quick Start Guide –
D400 Multi rear panel
T/C Active Current
3 wire R/T 2 wire R/T

2. Setup Menu

Options
Select Options in Credits menu, tick firmware
options to enable. Go to Finish and Commit
Inputs
All Analogue Inputs default to 12V
Select Input channel
 Setup input Type. V, A, Ohms, RT, TC
 Select Sample Rate
 Select Range / RT / TC Type
Use Back button to return to Setup Menu
Pens
Select Pen

Setup Scale

Set Alarms, if required

Setup Logging (required to Log and
Save data in memory)
Use Back button to return to Setup Menu
Localization
Settings for Language and Time Zones, etc.
Settings
(Main Menu > Configuration)
A5E01040171-04; 43-TV-25-39 Iss.4 GLO January 2016 UK
Select the Menu button
from the Process Screen
By default Pen 1 display
Analogue Input 1, Pen 2
displays Analogue 2 etc .
Back