York HIDS006B21S Service Manual page 79

(4) After removing the electrical box, the fan motor assembly can be seen.
Remove the wirings secured by the cable clamp on the fan motor securing plate.
(5) Remove four M4 screws securing the side of the fan casing, and remove the ring of the fan casing.
(6) Loosen the screw securing the fan runner onto the fan motor shaft using the adjustable wrench and
pull out the fan runner.
SM-18001-rev.1
TURN OFF all POWER supply switches.
Wiring
Ring
Fan Runner Securing Screw
Cable Clamp
Tool Phillips Screwdriver, Adjustable Wrench
Fan Runner
MAINTENANCE
(Ducted High Static Type)
4-5