York HIDS006B21S Service Manual page 163

(66) Not Prepared (FE)
(67) Not Prepared (FF)
(68) Not Prepared (H1)
(69) Indication of Hot Start (H2)
When this function is set as "No Indication" (01), "HOT-ST" is not indicated on the wired controller.
(70) Not Prepared (H3)
(71) Not Prepared (H4)
(72) Not Prepared (J1)
(73) Not Prepared (J2)
(74) Run Indicator Color (J3)
This function is utilized to set the run indicator color.
Setting Conditions
00
01
NOTE:
The red run indicator is flashing during the alarm.
(75) Not Prepared (J4)
(76) Not Prepared (J5)
(77) Not Prepared (J6)
(78) Not Prepared (J7)
(79) Eco-operation (J8)
This function is utilized to effectively optimize the setting temperature and provide energy saving.
When the setting temperature is changed during the air conditioning operation and while the operation
is started/stopped by ON/OFF button on the wired controller, the set temperature automatically returns
to (57/58) "Automatic Reset Temperature for Cooling/Heating (F5/F6)" as in the following figure.
However, the setting temperature is not automatically reset in the case that "Automatic COOL/HEAT
Operation" mode, or "Prohibiting Operation by Wired Controller" is set by the centralized controller.
N Operation Mode
* COOL
* DRY
* FAN
N Operation Mode
* HEAT
(80) Not Prepared (J9)
(81) Not Prepared (JA)
(82) Not Prepared (Jb)
(83) Not Prepared (K1)
(84) Not Prepared (K2)
(85) Not Prepared (K3)
(86) Not Prepared (K4)
(87) Not Prepared (K5)
(88) Not Prepared (K6)
(89) Not Prepared (K7)
(90) Not Prepared (K8)
(91) Not Prepared (K9)
(92) Not Prepared (KA)
(93) Not Prepared (L1)
(94) Not Prepared (L2)
SM-18001-rev.1
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
Color
Green
Red
Setting
Temperature Change
Setting
Temperature Change
Return to (57) Automatic Reset
STOP
Temperature for Cooling
Return to (58) Automatic Reset
Temperature for Heating
5-33