Installing And Removing An M.2 Module; Installing The M.2-Module On The Mainboard - Fujitsu CELSIUS M770 Operating Manual

Installing and removing an M.2 module

M.2module
Your device has two slots for M.2 modules:
• On the mainboard (standard)
• On the front panel module (optional)

Installing the M.2-module on the mainboard

► Open the casing (see
► Remove the boards (see
► Insert the M.2 module (b) at a slight angle in the direction of the arrow
(1) into the slot (a) on the mainboard.
► If the screw for retaining the M.2 module is located on one of the associated
stud bolts on the mainboard, remove the screw.
► Secure the M.2 module onto the mainboard with the screw (2). In doing so, select
the stud bolt appropriate to the length of the module.
► Install the boards (see
► Close the casing (see
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
Fujitsu
"Open the casing", Page
"Removing a board", Page
"Installing a board", Page
"Close the casing", Page
43).
85).
2
b
87).
44).
System expansions
a
1
81