Installing And Removing Heat Sinks; Removing The Heat Sink - Fujitsu CELSIUS M770 Operating Manual

System expansions

Installing and removing heat sinks

Removing the heat sink

The shape and position of the heat sink are device-dependent. The
approach is the same for all variants.
► Open the casing (see
► Remove the ventilation duct (see
► Undo the screws (1) on the heat sink.
► Remove the heat sink (2) from the casing.
You can now replace the processor (see
Never operate the device without a heat sink! Before initial startup, install the heat
sink again in the same way as it was installed in the device before removal.
94
"Open the casing", Page
"Removing ventilation duct", Page
2
"Replacing the processor", Page
43).
47).
1
1
1
1
a
96).
Fujitsu