System expansions
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
2
1
► Push the board into the slot (1).
► Secure the board with the screw (2), if one is fitted.
► Fold the board lock (3) back down to close it.
► If necessary, connect the cables to the board.
► For long boards: Close the service door (see
► Close the casing (see
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
88
"Close the casing", Page
3
"Close service door", Page
44).
46).
Fujitsu