Cleaning The Device; Energy Saving, Disposal And Recycling; Note On The European Ecodesign Directive - Fujitsu CELSIUS M770 Operating Manual

Cleaning the device

System unit,see Device Retransportation Transportation Device,
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.

Energy saving, disposal and recycling

Energysaving Disposal Recycling
You can find information on these subjects in the "Environment and Energy Information" manual
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").

Note on the European Ecodesign Directive

The hibernate state (Advanced Configuration and Power Interface ACPI S4 Save-to-disk) is
not available for workstations in certain configurations. As a consequence, it is not possible
for these systems to switch off automatically according to the Ecodesign directive.
With a working memory expansion which exceeds the free capacity of the system drive, the
capability to enable the hibernate state (ACPI S4) is technically not possible.
With suitably large system drives, the off state is automatically enabled in the
settings with which these workstations are delivered.
Fujitsu
Important notes
13