Screwing The Reader Onto The Module Holder - Fujitsu CELSIUS M770 Operating Manual

► Push the module holder a few centimetres out of the casing in the direction of the arrow.
► Pull the module holder completely out of the casing in the direction of the arrow.

Screwing the reader onto the module holder

2
a
Fujitsu
2
a
1
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws size
M3x4.5 (2).
System expansions
59