► Push the module holder a few centimetres out of the casing in the direction of the arrow.
► Pull the module holder completely out of the casing in the direction of the arrow.
► Remove the reader from the module holder (see
the module holder", Page
"Installing a module holder with reader", Page
or
► Remove the reader from the module holder (see
module holder", Page
► Close the service door (see
► Close the casing (see
Fujitsu
64) and reinstall the module holder (corresponds to
64) and install a blind cover in the drive bay.
"Close service door", Page
"Close the casing", Page
"Removing the reader from
60).
"Removing the reader from the
46).
44).
System expansions
63