Installing and removing a Compact Flash
module (optional)
Installing the Compact Flash module
CompactFlashmodule
► Open the casing (see
► Swing up the drive cage.
► If there is a drive in the drive cage, disconnect the data and power supply cables from the drive.
1
1
1
► Connect the connector for the data and power cables to the Compact Flash module.
► Fold down the drive cage.
► Close the casing (see
Fujitsu
"Opening the casing", Page
1
"Closing the casing", Page
34).
► Secure the Compact Flash module with
the screws (1) to the carrier.
► Slide the Compact Flash module with the
EasyChange rails into its bay until the
carrier noticeably engages (1).
35).
System expansions
43