Indicators On The Device - Fujitsu CELSIUS M770 Operating Manual

Operation

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
No. indicator
1 Indicator for optional
components, e.g.
SmartCard reader
2 Drive indicators
3 Power-on indicator
4 Hard disk indicator
28
Description
The indicator lights up when optional components, e.g. SmartCard
reader, are accessed.
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
Caution:In energy saving mode, the device must not be
disconnected from the mains supply as this can cause loss of data.
• The indicator is illuminated:
The device is switched on.
• The indicator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains) or is
ready to operate. If the device is ready to operate, it can be
switched on with the ON/OFF switch.
The indicator lights up when the hard disk drive in the device
is being accessed.
1
2
3
4
Fujitsu