Vsi - HP 6127XLG Series Command Reference Manual

Default
No global source address is specified for VXLAN tunnels.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies an IPv4 address.
Usage guidelines
A VXLAN tunnel uses the global source address if you do not specify a source interface or source address
for a VXLAN tunnel.
Examples
# Specify 1.1.1.9 as the global source address for VXLAN tunnels.
<Sysname> system-view
[Sysname] tunnel global source-address 1.1.1.9

vsi

Use vsi to create a VSI and enter VSI view.
Use undo vsi to delete a VSI.
Syntax
vsi vsi-name
undo vsi vsi-name
Default
No VSIs are created on the device.
Views
System view
Predefined user roles
network-admin
Parameters
vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
A VSI acts as a virtual switch to provide Layer 2 switching services for a VXLAN on a VTEP. A VSI has all
functions of a physical Ethernet switch, including source MAC address learning, MAC address aging,
and flooding.
A VSI can provide services only for one VXLAN.
Examples
# Create VSI vxlan10 and enter VSI view.
<Sysname> system-view
23