Selective-Flooding Mac-Address; Service-Instance - HP 6127XLG Series Command Reference Manual

Related commands
display l2vpn mac-address vsi

selective-flooding mac-address

Use selective-flooding mac-address to enable selective flood for a MAC address.
Use undo selective-flooding mac-address to disable selective flood for a MAC address.
Syntax
selective-flooding mac-address mac-address
undo selective-flooding mac-address mac-address
Default
Selective flood is not enabled for any MAC addresses.
Views
VSI view
Predefined user roles
network-admin
Parameters
mac-address: Specifies a MAC address. The MAC address cannot be all Fs.
Usage guidelines
This command excludes a remote MAC address from the flood suppression done by using the flooding
disable command. The VTEP will flood the frames destined for the specified MAC address to remote sites
when unknown-unicast floods are confined to the local site.
Examples
# Enable selective flood for 000f-e201-0101 on the VSI vsi1.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] selective-flooding mac-address 000f-e201-0101
Related commands
flooding disable

service-instance

Use service-instance to create an Ethernet service instance and enter Ethernet service instance view.
Use undo service-instance to delete an Ethernet service instance.
Syntax
service-instance instance-id
undo service-instance instance-id
Default
No Ethernet service instances exist on an interface.
19