Vxlan Invalid-Udp-Checksum Discard - HP 6127XLG Series Command Reference Manual

Parameters
vxlan-id: Specifies a VXLAN ID in the range of 0 to 16777215.
Usage guidelines
You can create only one VXLAN for a VSI. The VXLAN ID for each VSI must be unique.
Examples
# Create VXLAN 10000 for VSI vpna and enter VXLAN view.
<Sysname> system-view
[Sysname] vsi vpna
[Sysname-vsi-vpna] vxlan 10000
[Sysname-vsi-vpna-vxlan-10000]
Related commands
vsi

vxlan invalid-udp-checksum discard

Use vxlan invalid-udp-checksum discard to enable the device to drop the VXLAN packets that fail UDP
checksum check.
Use undo vxlan invalid-udp-checksum discard to restore the default.
Syntax
vxlan invalid-udp-checksum discard
undo vxlan invalid-udp-checksum discard
Default
The device does not check the UDP checksum of VXLAN packets.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the device to check the UDP checksum of VXLAN packets.
The device always sets the UDP checksum of VXLAN packets to 0. For compatibility with third-party
devices, a VXLAN packet can pass the check if its UDP checksum is 0 or correct. If its UDP checksum is
incorrect, the VXLAN packet fails the check and is dropped.
Examples
# Enable the device to drop the VXLAN packets that fail UDP checksum check.
<Sysname> system-view
[Sysname] vxlan invalid-udp-checksum discard
Related commands
vxlan invalid-vlan-tag discard
25