HP 6127XLG Series Command Reference Manual page 54

Parameters
tunnel-number: Specifies a VXLAN tunnel interface by its number. If you do not specify a VXLAN tunnel
interface, the command displays VXLAN IS-IS settings on all VXLAN tunnel interfaces.
Examples
# Display VXLAN IS-IS settings on Tunnel 101.
<Sysname> display vxlan isis tunnel 101
Tunnel101
MTU: 1400
DED: Yes
DED priority: 80
Hello timer: 10s
Hello multiplier: 3
CSNP timer: 10s
LSP timer: 100ms
Max LSP transmit number: 5
VXLANs:
1,50,100
Table 19 Command output
Field
MTU
DED
DED priority
Hello timer
Hello multiplier
CSNP timer
LSP timer
Max LSP transmit number
VXLANs
Description
Link MTU of the tunnel.
DED election result:
•
Yes—The device is a DED in the VXLAN network.
•
No—The device is not a DED in the VXLAN network.
DED priority of the device on the VXLAN tunnel interface.
Sets the interval at which VXLAN IS-IS sends hello packets to maintain the
adjacencies with neighbors.
Multiplier for calculating the VXLAN IS-IS adjacency holding time.
If the Graceful Restart function is disabled, the adjacency hold time equals the
VXLAN IS-IS hello interval multiplied by the hello multiplier.
If Graceful Restart is enabled, the adjacency hold time equals the restart
interval or equals the VXLAN IS-IS hello interval multiplied by the
holding-multiplier, whichever is greater.
The adjacency hold time is sent to all neighbors. If a neighbor has not received
a hello packet from this device before the holding timer expires, it removes the
adjacency with this device.
Sets the interval at which the VTEP sends CSNP packets to advertise LSP
summaries for LSDB synchronization. This timer takes effect only if the VTEP is
a DED.
Minimum LSP sending interval. The device must wait for this timer to expire
before sending LSPs.
Together with the maximum number of LSPs setting, this timer reduces the
impact of LSP traffic on VXLAN network performance.
Maximum number of LSPs that can be sent at each interval.
VXLANs on the VXLAN tunnel interface.
50