HP 6127XLG Series Command Reference Manual page 49

lsp-id lspid: Specifies an LSP identifier in the SYSID.Pseudonode ID-fragment num format, where sysID
represents the originating node or pseudo node, and Pseudo ID is separated by a dot from sysID and by
a hyphen from fragment num.
verbose: Displays detailed information about LSPs in the LSDB. If you do not specify this keyword, the
command displays LSP summaries.
tunnel tunnel-number: Specifies a VXLAN tunnel interface by its interface number. The tunnel interface
must already exist.
Examples
# Display LSP summaries for the VXLAN IS-IS process.
<Sysname> display vxlan isis lsdb
LSP ID
-----------------------------------------------------------------------------
0011.2200.0201.0000-00
0011.2200.0401.0000-00*
0011.2200.0401.0001-00*
Flags: *-Self LSP, +-Self LSP(Extended)
# Display detailed LSP information for the VXLAN IS-IS process.
<Sysname> display vxlan isis lsdb verbose
LSP ID: 0011.2200.0201.0000-00
Sequence number: 0x00000063
Checksum: 0x1bc2
Holdtime: 745s
Length: 74
Overload: 0
Source: 0011.2200.0201.0000
Neighbour
ID: 0011.2200.0401.0001, Cost: 10
VXLANs:
VXLAN ID: 100
VXLAN ID: 10
MAC addresses:
VXLAN ID: 10
0001-0001-0001
LSP ID: 0011.2200.0401.0000-00*
Sequence number: 0x00000060
Checksum: 0x7f76
Holdtime: 730s
Length: 55
Overload: 0
Source: 0011.2200.0401.0000
Link state database information for VXLAN ISIS (Tunnel 1)
Seq num
0x00000063
0x00000060
0x0000005f
Link state database information for VXLAN ISIS (Tunnel 1)
Confidence: 1
Checksum Holdtime
0x1bc2 1104
0x7f76 1089
0xf77 1175
45
Length Overload
74 0
55 0
57 0