Table of Contents
Advertisement
Running a Remote Desktop session
Initializing a Remote Desktop session
After setting up both the test set and the remote computer for Remote Desktop
Connectivity, as described in
are ready to start a Remote Desktop session.
Starting a session
Step
1 Click
2 Enter the computer name of the test set.
3 Click
4 Enter the login account name and
The test set display appears on the screen of the remote computer. Because the test set
front-panel keys are not available when using the test set remotely, three alternative
methods are available to perform the functions of the front-panel keys, as detailed in the
following sections:
Getting Started Guide
To initialize a Remote Desktop Session, you need to know the Computer
Name of the test set. This information can be shown on the test set display
by following the procedure in the section
name of the test set"
Start
>
All Programs
>
>
Communications
Remote Desktop
Connection.
.
Connect
password.
Only the current User or an Administrator can remotely log into the test
set. To see who the current user of the test set is, press
test set until you can view the current user name on the Start menu. If no
one is currently logged into the test set, any valid instrument user can
remotely log in.
Using Microsoft Windows Operating System
on page 79.
"Setting up Remote Desktop operation"
Notes
>
Accessories
A Remote Desktop Connection dialog
appears:
A login dialog box appears.
The default account name is Instrument and
the default password is measure4u, but these
parameters may be changed by instrument
users.
"How to locate the computer
on page 77, you
Ctrl
+
Esc
on the
4
81
Advertisement
Table of Contents
