Table of Contents
Advertisement
3
Test Set Operating System
Using the test set recovery system
Step
1 Make sure the test set is turned off.
2 Turn on the test set.
3 When the Agilent Recovery System has
After exiting the Agilent Recovery System, the test set reboots. If the original factory test set
system has been restored, the test set re-executes the following
the first time"
66
•
Press the down arrow key to move the
highlight to Agilent Recovery System,
then press Enter.
booted, follow the on-screen instructions
to recover the image of the C: drive.
•
Press 2, then press Enter to select the
recovery.
•
Press 1, then press Enter to continue.
•
Press 1, then Enter to confirm.
on page 15
Additional recovery steps may be required to fully recover the system
to a more current working state. This could involve restoring your own
backups of the test set configuration, including re-installing
applications, data, and performing system customizations.
Notes
After the Agilent Technologies screen is
displayed,
this screen is displayed for five seconds.
It may take up to 25 minutes for this process to
complete
process:"Turning on the test set
Getting Started Guide
Advertisement
Table of Contents
