Table of Contents
Advertisement
2
Front Panel Features
Input/Output Hardware Interface
The connectors which are exposed when the impact cover is in place are illustrated
below:
Item
#
1
REF IN
2
TRIG 1
3
TRIG 2
4
TRIG 3
5
TRIG IN
6
TRIG 1
7
TRIG 2
8
TRIG 3
30
Name
This BNC input port accepts a timebase reference input. Under the impact cover, it
is routed to the Ref In port of the M9300A Reference module.
This BNC trigger port (for the left sub-instrument) is used for output triggers from
the analyzer. Under the impact cover, it is routed to the Trig 2 port of the M9214A
IF Digitizer module.
This BNC trigger port (for the left sub-instrument) is used for input or output
triggers to or from the source. Under the impact cover, it is routed to the Trig 2 port
of the M9311A Modulator module.
This BNC trigger port (for the left sub-instrument) is an RF blanking trigger which
is supplied to the TRIG 3 port on the E6618A Multiport Adapter. Under the impact
cover, it is routed to the Trig 2 port of the M9310A Source Output module.
This BNC trigger port (for the left sub-instrument) accepts an external trigger input
to the analyzer. Under the impact cover, it is routed to the Trig 1 port of the
M9214A IF Digitizer module.
This BNC trigger port (for the right sub-instrument) is used for output triggers from
the analyzer. Under the impact cover, it is routed to the Trig 2 port of the M9214A
IF Digitizer module.
This BNC trigger port (for the right sub-instrument) is used for input or output
triggers to or from the source. Under the impact cover, it is routed to the Trig 2 port
of the M9311A Modulator module.
This BNC trigger port (for the right sub-instrument) is an RF blanking trigger
which is supplied to the TRIG 3 port on the E6618A Multiport Adapter. Under the
impact cover, it is routed to the Trig 2 port of the M9310A Source Output module.
Description
Getting Started Guide
Advertisement
Table of Contents
