Step
4 Verify installation
Getting Started Guide
Action
a Cycle the power on the signal test set.
b On the Virtual Front Panel press System,
Show, System.
c Verify that the new application appears in
the list.
Test Set Operating System
Notes
The application will not be available for
use until after the power has been cycled
This displays the list of installed
applications.
If you require further assistance, please
contact the Agilent support team.
Online assistance:
http://www.agilent.com/find/assist
If you do not have access to the Internet,
contact your local Agilent Technologies
Sales and Service Office, or if in the
United States, call 1-800-829-4444.
3
49