Table of Contents
Advertisement
Preparing the installation
Step
FPGA update warning window (may be displayed, if any FPGA updating occurs):
CAUTION
3 When the software updater window shows
Software updater window, showing completion of the process:
Getting Started Guide
During FPGA programming, DO NOT power off the E6630A
for ANY reason! Interrupting the FPGA update process can
place the instrument in an unusable state, requiring it to be
returned to Agilent for repair.
"The software upgrade was successful",
you will be prompted to reboot.
Test Set Operating System
Notes
Reboot the E6630A by clicking
the window. Windows will display a
"System Shutdown" warning window;
this is normal.
3
in
Finish
71
Advertisement
Table of Contents
