Configuring The S7 F System - Siemens SIMATIC S7 F Manual

Getting Started
2.2.2

Configuring the S7 F System

The following steps show you how to create a new project and configure the
hardware setup described above.
Procedure
1. Open SIMATIC Manager, and create a new project called "FProject" using the
File > New menu command.
2. Insert a new S7-400 station: Insert > Station > SIMATIC 400 Station.
3. Open the hardware configuration (HWCONFIG) of the SIMATIC 400(1) station
created (you can change the name) by double-clicking the hardware object (or
right-click the Open Object pop-up menu command).
4. Insert the individual hardware components of the SIMATIC 400 from the
"Hardware Catalog" window (you can open the catalog with View > Catalog)
by dragging and dropping them to the station window.
5. First place the UR2 mounting rack from the RACK 400 catalog.
6. Insert the standard power supply (PS 407 10 A) in slot 1 of the mounting rack.
7. Place the CPU 417-4H V3.1 in slot 3: Create a subnet (which will subsequently
be connected to the ET 200M) in the "Properties - PROFIBUS Interface DP
Master" dialog box by clicking New.
2-6
Fail-Safe Systems
A5E00085588-03