Siemens SIMATIC S7 F Manual page 152

Programming
The differences are described as follows:
Text
Deleted
Added
Task changed from 'Task1' to 'Task2'
Run-time group changed from 'Group1' to
'Group2'
Instance DB changed from 'I-DB1' to 'I-
DB2'
Run position changed
Interface changed
Interconnection changed from 'Connect1'
to 'Connect2'
Result of the Comparison of the Safety Blocks (online program)
If the "Compare with: field selects the online program, only the Block View
difference output is shown. There are two additional viewing options available by
use of the check boxes:
•
Show unconnected F-FB input parameter differences
•
Filter F-System checksums
5-70
Meaning
Block only exists in the source
Block only exists in the comparison object
Block in another task/priority class
Block in another run-time group
Block has another instance DB
Block in different run position within the run-time
group
Number of parameters changed
Interconnection of a parameter changed
Fail-Safe Systems
A5E00085588-03