Siemens SIMATIC S7 F Manual page 334

Check Lists
Phase
Configuration of the hardware Rules for F-Systems
Parameter assignment of the
CPU
Parameter assignment of the
F-I/Os
Programming
Program design
Creation of the CFC charts.
Creation of the run-time
groups
Placement and
interconnection of the F
function blocks
A-2
Note Refer to
F-SYS: Sect. 4.2
Verification of the
hardware components
F-SYS: App. A.2
used on the basis of the
check list of the certified
modules
•
CPU contains the F-SYS: Sect. 4.3
safety program
•
Password
•
Settings for safety F-SYS: Sect. 4.4, 4.5,
7.4
mode
•
Configuration of the F SM: Chap. 3 and 9
monitoring times
F ET 200S Chap. 4 and
•
Module redundancy 9
(optional)
Safety notes for F-SYS: Sect. 5.2.1
programming
Verification of the
F-SYS: App. A.3
hardware components
used on the basis of the
check list of the certified
F function blocks
Rules for the CFC F-SYS: Sect. 5.2.4
charts of the Safety
Program
Rules for the run-time F-SYS: Sect. 5.2.5
groups of the Safety
Program
Rules for F function F-SYS: Sect. 5.3.1-
blocks 5.3.4, Chap. 8
F-SYS: Sect. 5.3.5
Rules for F driver blocks
F-SYS: Sect. 5.3.9, 7.4
Rules for the
interconnection of the
F-SYS: Sect. 5.3.10
F_CYC_CO fail-safe
F-SYS: Sect. 7.4
block
F-SYS: Sect. 5.3.7,
Rules for the
5.3.8
communication of fail-
safe blocks
F-SYS: Sect. 5.3.6
Configuration of the
monitoring times
Startup Characteristics
Passivation and
reintegration
Check
Fail-Safe Systems
A5E00085588-03