Event Effects; Embedded Process Values - Honeywell X Series User Manual

A second Event can then be set up using the User Counter Effect in Event 1 as the Cause
for Event 2. In this example the Cause will be triggered by User Counter 1 (in Event 1) reach-
ing an count of 50. The Effect of this will be a Mark on Chart.
In summary: every 30 seconds a scheduled interval will cause a counter to increment by 1.
When the increments reach 50 a mark will be placed on the Chart.
Depending on the Type of effect selected the menus will change as follows:
Adding Embedded Process Values in a Mark on Chart means you can display information
such as:
43-TV-25-30 Iss.6 GLO Aug 07 UK
Event 2 example
Cause = User Counter 1 triggers at 50 increments
Effect = A Mark is placed on the Chart

Event Effects

• Enabled - Tick to enable
• Type – Choose from Mark on Chart, Logging, Totaliser, Digital Outputs, Alarm Ack,
Email, Screen Change, Print Screen, Counters, Max Mins (Reset), Chart Control, Clear
All Messages, Delayed Event, Script Timers, Play Sounds, Display Alert and Batch.
• Mark on Chart - Is an effect if a pen goes into an alarm state a mark will be placed on a
chart and will display, for example: "Pen 2 Alm 1: Into Alarm (37)".
Select Marker Type as Preset to display a list of all available markers that have been
previously added to the recorder. To add Preset Markers go to
page 98.
Select the Marker Type as User Defined to add pen information using Embedded Proc-
ess Variable.

Embedded Process Values

"Preset Markers" on
91