Analogue Input Signal Wiring - Honeywell X Series User Manual

Thermocouples
Ensure polarity of thermocouple is correct.
Resistance Thermometers
If using 2 wire R/T the + and - terminals must be linked together.
page 19.

Analogue Input Signal Wiring

This Analogue Input card can be used as an option to add up to 6 more Analogue Input
channels for the eZtrend QXe
numbers 9 to 14. The standard fit Analogue Input card is fitted in slot A with up to 6 channels
(channels numbers 1 to 6).
To fit this option card into the eZtrend QXe recorder you will require an expansion card to
interface to the recorder.
18
CAUTION
CONTROL UNIT DAMAGE
Do not apply a hazardous live voltage between + and - pins within a channel. (eg. 60V
maximum on voltage ranges, 5V maximum on millivolts ranges). Do not apply a voltage
above 1.2V to the * pin.
Failure to comply with these instructions may result in product damage
Figure 2.6 Analogue Input connector
CH1 CH2
CJC
CH3 CH4
This will fit into Slot B and will display as channel
recorder.
See "QXe Analogue Input (Standard) card" on page 19.
See Figure 2.7 on
CH5 CH6 CH7
43-TV-25-30 Iss.6 GLO Aug 07 UK
CH8