Analogue Input Card - Honeywell X Series User Manual

Earth screw
(ground)
Analogue Input
card (option)
Slot B
CJC Sensor
24V TX Power
Supply Output /
RS485 port /
USB Host card
(option)

Analogue Input Card

Each
titrend SX and up to 6 channels for the eZtrend
way screw terminal plugs that fit into a PCB header on the rear of the unit. The 2-way CJC
sensor should remain fitted in the central 2-way header.
The Minitrend QX can have two analogue input cards fitted giving up to 16 input channels
(2 x 8 channel cards). The slot positions are A & B, these are identified on the rear panel on
the back of the unit. Either slot can be used, it is recommended that slot A is used if only one
card is fitted.
The Multitrend SX can have up to 6 analogue input cards fitted, up to 48 input channels.
The slot positions A, B, C, D, E or F; these are identified on the rear panel. PC boards are
fitted in order, slot "A" starts from the top.
The eZtrend
providing up to 6 more channels. This card would be used after using the 3 or 6 channel
standard eZtrend
Input (Standard) card" on page
To fit this option card into the eZtrend QXe recorder you will require an expansion card to
interface to the recorder.
16
Wire seal provision
24Vdc TX
Analogue Input /
Ethernet connection
card (std) - Slot A
Figure 2.5
has up to 8 input channels for the Minitrend QX and the Mul-
Analogue Input card
can use this card as an additional Analogue Input card fitted in Slot B,
QXe
Analogue Input card which is fitted in Slot A, see
QXe
See "QXe Analogue Input (Standard) card" on page 19.
20 to 30VDC / 20 to 25VAC Input
Instrument power (option)
USB
RS485
ETHERNET
eZtrend
QXe Rear panel
. Connections are made via 2 x 12-
QXe
19.
AC supply
100 - 250 VAC
Alarm Relay or
Digital I/O
Slot G (option)
"QXe Analogue
43-TV-25-30 Iss.6 GLO Aug 07 UK