Add Channels For Logging - Honeywell X Series User Manual

The next section is Database Configuration, a list of connected database servers and a list
of databases that are currently being logged to. In this section is a window showing the
channels available to be logged. As channels are selected from this window, three additional
buttons become active: 'Add Channel selection', select each channel for logging, 'Add all
Channels' for logging and Clear Channel selection.
As each channel is selected, or all channels depending on the button selected, the Logging
Channel Configuration box appears so the Log Rate and Type of logging can be set for each
channel individually or all channels.
If "all channels" are added the next box will ask how often you want these channels to be
logged (log rate), this can be a sample every second to one sample every 24 hours. This
selection will apply to all channels.
If channels are added one at a time using the "Add Channel Selection" button the same log
rate box comes up, but a different log rate can be set for each channel.
When all the required channels have been added click OK.
When the channels have been selected they will appear in the bottom window, click on Ap-
ply to enable the channels to log. Once the channels are in the 'Channels logging to selected
43-TV-25-30 Iss.6 GLO Aug 07 UK
Figure 8.7 Logging Configuration
This example of the logging configuration box was produced by right clicking on a
specific recorder. Some of the areas have been auto populated.

Add Channels for Logging

225