Symbols; Safety - Honeywell X Series User Manual

Safety

The X Series range of instruments is compliant with the requirements of BS EN 61010-
1:2001 "Safety Requirements for Electrical Equipment for Measurement, Control and Labo-
ratory Use" and UL 61010C-1 and CSA 22.2-1010.1, as options. If the equipment is used in
a manner not specified, the protection provided by the equipment may be impaired.
The QX and SX range of instruments is compliant to the requirements for Class 1, Div.2
Hazardous (Classified) Locations.

Symbols

One or more of the following symbols may appear on the recorder labelling.
2
• For the purpose of this manual the
mark names or registered trademark names in every instance.
• Company names and Product names mentioned in this manual are trademarks or
registered trademarks of their individual owners.
Symbol
™ ®
and symbols will not follow their own trade-
Table 1.2 : Safety Symbols
Meaning
Caution - refer to manual for
instructions
Caution - risk of electric
shock
Direct Current
Protective conductor terminal
Earth (ground) terminal
Static Electricity
Directive 2002/96/EC
WEEE: Waste Electrical and
Electronic Equipment
43-TV-25-30 Iss.6 GLO Aug 07 UK