Field Io Menu - Honeywell X Series User Manual

Field IO Menu

(Main Menu > Configure > Setup > Edit Setup> Field IO)
Select which type of Field Inputs/Outputs are required for configuration depending on what
type of cards are fitted in the recorder.
52
• Recording - Set up Scheduled recording and specify the Storage Bias for recording
"Edit Recording" on page 115.
logged and chart data.
• Reports - Reports can be generated manually or on a periodical basis using event sys-
tem to show daily/weekly/monthly totals, max mins, averages etc.. the reports can be
printed, e-mailed as attachments or exported to external media.
must be set up first before a report can be run, see
page 118. To run a report see
• Analogue In - Select this to configure each Analogue Input channel.
In Menu" on page 54.
• Analogue Out - Select this to configure each Analogue Output channel.
logue Out Menu" on page 57.
• Alarm/Digital IO - Select this to configure Relay Alarm Output card or Digital Input/Out-
See "Alarm / Digital IO" on page 58.
put card.
• Pulse Inputs - Select this to configure each Pulse Input channel.
on page 60.
(Not available for the
• Linearisation Tables - To be used with Analogue Input type Volts, Amps or Ohms.
These are user defined tables that can be set up to allow a non-linear input sig-
nal to be used. See "Linearisation Tables" on page 61.
"Reports menu" on
"Reports (Process)" on page 153.
eZtrend QXe
(Not available for the
eZtrend QXe
recorder).
43-TV-25-30 Iss.6 GLO Aug 07 UK
The report details
See "Analogue
See "Ana-
recorder).
See "Pulse Input"