Diagnostics; Hardware Status - Honeywell X Series User Manual

Go Back to return to the previous screen or select Print to print the screen.

Diagnostics

(Main Menu > Status > Diagnostics)
The Diagnostics button will become active when Health Watch/Maintenance is selected as
a firmware option. To enable this go to
(Main Menu > Status > Diagnostics > Hardware)
Complete diagnostics are shown for each of the following categories:
43-TV-25-30 Iss.6 GLO Aug 07 UK
• Alarm Rate - Displays the alarm rate, in Hertz, if this has been set up to change when
the pen goes into an active alarm state. A tick denotes if it is enabled and a star will indi-
cate the current log rate
• Group - Displays the name of the group that this pen has been assigned to.
"Hardware Status" on page 161
• Hardware -
"Events Status" on page 164
• Events -
See "Comms Status" on page 165
• Comms -
See "Media Status" on page 167
• Media -

Hardware Status

• Analogue In Status -
• Analogue Out Status-
• Alarm/Digital IO Status -
• Pulse Input Status -
"Options" on page 157.
See "Analogue In Status" on page 162
See "Analogue Out Status" on page 163
See "Alarm/Digital IO Status" on page 163
See "Pulse Inputs Status" on page 164
161